POWER UNIT
| Engine: |
PERKINS |
| Type: |
1106D-E66TA |
| Kind: |
6-cylinder diesel engine, liquid-cooled |
| Output: |
|
| Nominal: |
129.6 kW / 2,000 rpm |
| ECO Mode: |
125 kW / 1,800 rpm |
| Fuel Tank: |
300 litres |
| Electrical System: |
24 V |
UNDERCARRIAGE
| Crawler Tracks: |
provided with rubber pads |
| Ground Contact: |
2,830mm x 305mm |
| Suspension: |
rigid |
| Track Tension Adjuster: |
spring assembly |
| Track Rollers: |
lifetime grease lubricated |
| Traction Drive: |
hydraulic, separate drive and electronic control provided for each crawler track |
| Speeds: |
|
| Pave Speed: |
24 m/min. |
| Travel Speed: |
4.5 km/h |
| Service Brake: |
hydrostatic |
| Parking Brake: |
spring-loaded multiple-disk brake, maintenance-free |
MATERIAL HOPPER
| Hopper Capacity: |
13 tonnes |
| Width: |
3265mm |
| Feed Height: |
594mm (bottom of material hopper) |
| Push-Rollers: |
oscillating, displaceable forwards by 100mm |
CONVEYORS AND AUGERS
| Conveyors: |
2, with replaceable feeder bars, conveyor movement reversible for a short time |
| Drive: |
hydraulic, separate drive provided for each conveyor |
| Speed: |
25 m/min. |
| Augers: |
2, with replaceable auger blades, auger rotation reversible |
| Diameter: |
400mm |
| Drive: |
hydraulic, separate drive provided for each auger |
| Speed: |
83 revs/min. |
| Auger Height: |
|
| Standard: |
infinitely variable by 14cm, mechanical |
| Option: |
infinitely variable by 20cm, hydraulic (lowest position 5cm above the ground) |
| Lubrication: |
Centralized Lubrication System with electrically driven grease pump for conveyor and auger bearings |
SCREED
| AB 500-2 (TV,TP1): |
|
| Basic Width: |
2.55m, infinitely variable range 2.55m to 5m |
| Maximum Width (TV): |
6m |
| AB 600-2 (TP1,TV): |
|
| Basic Width: |
3m, infinitely variable range 3m to 6m |
| Maximum Width (TV): |
6m |
SPRAYJET MODULE
| Emulsion Tank: |
Holding Capacity: up to 2,000 litres |
| |
heated electrically, regulated by thermostat |
| |
Tank Shell: insulated against loss of heat |
| |
Emulsion Level Indicator: mechanical |
| Extra Emulsion Tank: |
Holding Capacity: up to 5,000 litres |
| |
stand-alone Heating Unit operated by diesel fuel |
| |
Tank Shell: insulated against loss of heat |
| |
Emulsion Level Indicator: mechanical |
| |
Tank is accommodated in the paver’s material hopper |
| Spray Bars:: |
Width: extending from 2.5m to 6m |
| |
Number of Units: 5 |
| |
Distance between Nozzles: 250mm |
| Spray Nozzles: |
double-slotted |
| |
Rate of Spread: 0.2 to 1.6 kg/m² *** |
| |
Spray Cone: 120° |
| |
Spraying Pressure: 3 bar |
DIMENSIONS AND WEIGHTS
| Length: |
Tractor Unit and Screed in Transport Position |
| AB 500-2 TV |
6m |
| AB 500-2 TP1 |
6.13m |
| AB 600-2 TP1 |
6.13m |
| AB 600-2 TV |
6m |
| Weights: |
Tractor Unit with Screed |
| AB 500-2 TV |
20.8 tonnes |
| AB 500-2 TP1 |
21.05 tonnes |
| AB 600-2 TP1 |
21.55 tonnes |
| AB 600-2 TV |
21.25 tonnes |
| Key: |
|
| TV: |
equipped with Tamper and Vibrators |
| TP1: |
equipped with Tamper and 1 Pressure Bar |
| ***: |
The rate of spread per square metre must be determined as a function of the emulsion or tack coat to be used. The rate of spread depends on the emulsion or tack coat's consistency and temperature when applied. |
| AB: |
Extending Screed |
Technical alterations reserved.
