POWER UNIT
| Engine: |
PERKINS |
| Type: |
1106D-E66TA |
| Kind: |
6-cylinder diesel engine, liquid-cooled |
| Output: |
|
| Nominal: |
129.6 kW / 2,000 rpm |
| ECO Mode: |
125 kW / 1,800 rpm |
| Fuel Tank: |
220 litres |
| Electrical System: |
24 V |
UNDERCARRIAGE
| Front Wheels: |
4, mounted on bogies (oscillating axle) |
| Tyre Equipment: |
solid tyres |
| Tyre Size: |
540/300-390 mm |
| Rear Wheels: |
2, pneumatic tyres, tubeless |
| Tyre Size: |
14.00 R 25 |
| Traction Drive: |
separate hydraulic drive provided for each wheel |
| Standard: |
2 powered rear wheels |
| Option: |
2 rear wheels and 4 front wheels powered |
| Speeds: |
|
| Pave Speed: |
18 m/min. |
| Travel Speed: |
20 km/h |
| Turning Radius: |
6.5 m (outside) |
| Power Steering: |
hydraulic |
| Service Brake: |
amply-dimensioned multiple-disk brake operated by foot pedal |
| Parking Brake: |
spring-loaded multiple-disk brake, maintenance-free |
| Service Brake: |
hydrostatic |
MATERIAL HOPPER
| Hopper Capacity: |
13 tonnes |
| Width: |
3265mm |
| Feed Height: |
594mm (bottom of material hopper) |
| Push-Rollers: |
oscillating, displaceable forwards by 100mm |
CONVEYORS AND AUGERS
| Conveyors: |
2, with replaceable feeder bars, conveyor movement reversible for a short time |
| Drive: |
hydraulic, separate drive provided for each conveyor |
| Speed: |
25 m/min. |
| Augers: |
2, with replaceable auger blades, auger rotation reversible |
| Diameter: |
400mm |
| Drive: |
hydraulic, separate drive provided for each auger |
| Speed: |
83 revs/min. |
| Auger Height: |
|
| Standard: |
infinitely variable by 14cm, mechanical |
| Option: |
infinitely variable by 20cm, hydraulic (lowest position 5cm above the ground) |
| Lubrication: |
Centralized Lubrication System with electrically driven grease pump for conveyor and auger bearings |
SCREED
| AB 500-2 (TV,TP1): |
|
| Basic Width: |
2.55m, infinitely variable range 2.55m to 5m |
| Maximum Width: |
8m |
| AB 600-2 (TP1,TV): |
|
| Basic Width: |
3m, infinitely variable range 3m to 6m |
| Maximum Width: |
8m |
| Layer Thickness: |
30cm |
| Screed Heating: |
electric by heating rods |
| Power Supply: |
three-phase A.C. generator |
DIMENSIONS AND WEIGHTS
| Length: |
Tractor Unit and Screed in Transport Position |
| AB 500-2 TV |
6m |
| AB 500-2 TP1 |
6.13m |
| AB 600-2 TP1 |
6.13m |
| AB 600-2 TV |
6m |
| Weights: |
Tractor Unit with Screed |
| AB 500-2 TV |
17.3 tonnes |
| AB 500-2 TP1 |
17.55 tonnes |
| AB 600-2 TP1 |
18.05 tonnes |
| AB 600-2 TV |
17.75 tonnes |
| Key: |
|
| TV: |
equipped with Tamper and Vibrators |
| TP1: |
equipped with Tamper and 1 Pressure Bar |
Technical alterations reserved.
