POWER UNIT
| Engine: |
DEUTZ |
| Type: |
TCD 2011 L04w |
| Kind: |
4-cylinder diesel engine |
| Output: |
|
| Nominal: |
58 kW / 2,300 rpm |
| ECO Mode: |
50 kW / 1,800 rpm |
| Fuel Tank: |
120 litres |
| Electrical System: |
24 V |
UNDERCARRIAGE
| Crawler Tracks: |
provided with rubber pads |
| Ground Contact: |
2,000mm x 260mm |
| Suspension: |
rigid |
| Track Tension Adjuster: |
spring assembly |
| Track Rollers: |
lifetime grease lubricated |
| Traction Drive: |
hydraulic, separate drive and electronic control provided for each crawler track |
| Speeds: |
|
| Pave Speed: |
30 m/min. |
| Travel Speed: |
3.6 km/h |
| Service Brake: |
hydrostatic |
| Parking Brake: |
spring-loaded multiple-disk brake, maintenance-free |
MATERIAL HOPPER
| Hopper Capacity: |
10 tonnes |
| Width: |
3280mm |
| Feed Height: |
530mm (bottom of material hopper) |
| Push-Rollers: |
oscillating, displaceable forwards by 80mm |
CONVEYORS AND AUGERS
| Conveyors: |
2, with replaceable feeder bars, conveyor movement reversible for a short time |
| Drive: |
hydraulic, separate drive provided for each conveyor |
| Speed: |
25 m/min. |
| Lubrication: |
lifetime grease lubricated |
| Augers: |
2, auger rotation reversible |
| Diameter: |
300mm |
| Drive: |
hydraulic, separate drive provided for each auger |
| Speed: |
80 revs/min. |
| Auger Height: |
|
| Standard: |
infinitely variable by 13cm, mechanical |
| Lubrication: |
lifetime grease lubricated |
SCREED
| AB 340 (V): |
|
| Basic Width: |
1.8m, infinitely variable range 1.8m to 3.4m |
| Maximum Width (V): |
4.2m |
| Layer Thickness: |
20cm |
| Screed Heating: |
electric by heating rods |
| Power Supply: |
three-phase A.C. generator |
DIMENSIONS AND WEIGHTS
| Length: |
Tractor Unit and Screed in Transport Position |
| AB 340 V |
4.95m |
| Weights: |
Tractor Unit with Screed |
| AB 340 V |
8.5 tonnes |
| Key: |
|
| V: |
equipped with Vibrators |
| AB: |
Extending Screed |
Technical alterations reserved.
