POWER UNIT
| Engine: |
PERKINS |
| Type: |
1104D-E44TA |
| Kind: |
4-cylinder diesel engine, liquid-cooled |
| Output: |
|
| Nominal: |
100 kW / 2,000 rpm |
| ECO Mode: |
95 kW / 1,800 rpm |
| Fuel Tank: |
300 litres |
| Electrical System: |
24 V |
UNDERCARRIAGE
| Crawler Tracks: |
provided with rubber pads |
| Ground Contact: |
2,830mm x 305mm |
| Suspension: |
rigid |
| Track Tension Adjuster: |
spring assembly |
| Track Rollers: |
lifetime grease lubricated |
| Traction Drive: |
hydraulic, separate drive and electronic control provided for each crawler track |
| Speeds: |
|
| Pave Speed: |
24 m/min. |
| Travel Speed: |
4.5 km/h |
| Service Brake: |
hydrostatic |
| Parking Brake: |
spring-loaded multiple-disk brake, maintenance-free |
MATERIAL HOPPER
| Hopper Capacity: |
13 tonnes |
| Width: |
3265mm |
| Feed Height: |
594mm (bottom of material hopper) |
| Push-Rollers: |
oscillating, displaceable forwards by 100mm |
CONVEYORS AND AUGERS
| Conveyors: |
2, with replaceable feeder bars, conveyor movement reversible for a short time |
| Drive: |
hydraulic, separate drive provided for each conveyor |
| Speed: |
25 m/min. |
| Augers: |
2, with replaceable auger blades, auger rotation reversible |
| Diameter: |
400mm |
| Drive: |
hydraulic, separate drive provided for each auger |
| Speed: |
83 revs/min. |
| Auger Height: |
|
| Standard: |
infinitely variable by 14cm, mechanical |
| Option: |
infinitely variable by 20cm, hydraulic (lowest position 5cm above the ground) |
| Lubrication: |
Centralized Lubrication System with electrically driven grease pump for conveyor and auger bearings |
SCREED
| AB 500-2 (TV,TP1,TP2): |
|
| Basic Width: |
2.55m, infinitely variable range 2.55m to 5m |
| Maximum Width (TV): |
8m |
| AB 600-2 (TP1,TV): |
|
| Basic Width: |
3m, infinitely variable range 3m to 6m |
| Maximum Width (TV): |
8m |
| Layer Thickness: |
30cm |
| Screed Heating: |
electric by heating rods |
| Power Supply: |
three-phase A.C. generator |
DIMENSIONS AND WEIGHTS
| Length: |
Tractor Unit and Screed in Transport Position |
| AB 500-2 TV |
6m |
| AB 500-2 TP1 |
6.13m |
| AB 500-2 TP2 |
6.13m |
| AB 600-2 TP1 |
6.13m |
| AB 600-2 TV |
6m |
| Weights: |
Tractor Unit with Screed |
| AB 500-2 TV |
18.4 tonnes |
| AB 500-2 TP1 |
18.65 tonnes |
| AB 500-2 TP2 |
19 tonnes |
| AB 600-2 TP1 |
19.15 tonnes |
| AB 600-2 TV |
18.85 tonnes |
| Key: |
|
| TV: |
equipped with Tamper and Vibrators |
| TP1: |
equipped with Tamper and 1 Pressure Bar |
| TP2: |
equipped with Tamper and 2 Pressure Bars |
| AB: |
Extending Screed |
Technical alterations reserved.
