POWER UNIT
| Engine: |
PERKINS |
| Type: |
1106D-E66TA |
| Kind: |
6-cylinder diesel engine, liquid-cooled |
| Output: |
|
| Nominal: |
174 hp / 2,000 rpm |
| ECO Mode: |
168 hp / 1,800 rpm |
| Fuel Tank: |
79 gal. (US) |
| Electrical System: |
24 V |
UNDERCARRIAGE
| Crawler Tracks: |
provided with rubber pads |
| Ground Contact: |
9 ft. 3 in. x 1 ft. |
| Suspension: |
rigid |
| Track Tension Adjuster: |
spring assembly |
| Track Rollers: |
lifetime grease lubricated |
| Traction Drive: |
hydraulic, separate drive and electronic control provided for each crawler track |
| Speeds: |
|
| Pave Speed: |
79 fpm |
| Travel Speed: |
2.8 mph |
| Service Brake: |
hydrostatic |
| Parking Brake: |
spring-loaded multiple-disk brake, maintenance-free |
MATERIAL HOPPER
| Hopper Capacity: |
28,660 lbs. |
| Width: |
10 ft. 9 in. |
| Feed Height: |
23.39 in. |
| Push-Rollers: |
oscillating, displaceable forwards by 100mm |
CONVEYORS AND AUGERS
| Conveyors: |
2, with replaceable feeder bars, conveyor movement reversible for a short time |
| Drive: |
hydraulic, separate drive provided for each conveyor |
| Speed: |
82 ft/min. |
| Augers: |
2, with replaceable auger blades, auger rotation reversible |
| Diameter: |
16 in. |
| Drive: |
hydraulic, separate drive provided for each auger |
| Speed: |
83 revs/min. |
| Auger Height: |
|
| Standard: |
infinitely variable by 14cm, mechanical |
| Option: |
infinitely variable by 20cm, hydraulic (lowest position 5cm above the ground) |
| Lubrication: |
Centralized Lubrication System with electrically driven grease pump for conveyor and auger bearings |
SCREED
| AB 500-2 (TV,TP1,TP2): |
|
| Basic Width: |
8 ft. 2 in. infinitely variable range 8 ft. 4 in. to 16 ft. 5 in. |
| Maximum Width (TV/TP1): |
27 ft. 11 in. |
| AB 600-2 (TV,TP1): |
|
| Basic Width: |
9 ft. 10 in. infinitely variable range 9 ft . 10 in. to 19 ft. 8 in. |
| Maximum Width (TV/TP1): |
29 ft. 6 in. |
| SB 250 (TP1,TP2,TV): |
|
| Basic Width: |
8 ft. 2 in. |
| Maximum Width (TV/TP1): |
32 ft. 10 in. |
DIMENSIONS AND WEIGHTS
| Length: |
Tractor Unit and Screed in Transport Position |
| AB 500-2 TV |
19.68 ft. |
| AB 500-2 TP1 |
20.1 ft. |
| AB 500-2 TP2 |
20.1 ft. |
| AB 600-2 TV |
19.68 ft. |
| AB 600-2 TP1 |
20.1 ft. |
| SB 250 TP1 |
19.35 ft. |
| SB 250 TP2 |
19.35 ft. |
| SB 250 TV |
19.35 ft. |
| Weights: |
Tractor Unit with Screed |
| AB 500-2 TV |
42,549.22 lbs |
| AB 500-2 TP1 |
43,100.37 lbs |
| AB 500-2 TP2 |
43,871.99 lbs |
| AB 600-2 TV |
43,541.3 lbs |
| AB 600-2 TP1 |
44,202.68 lbs |
| SB 250 TP1 |
39,639.11 lbs |
| SB 250 TP2 |
39,947.76 lbs |
| SB 250 TV |
39,132.05 lbs |
| Key: |
|
| TV: |
equipped with Tamper and Vibrators |
| TP1: |
equipped with Tamper and 1 Pressure Bar |
| TP2: |
equipped with Tamper and 2 Pressure Bars |
| AB: |
Extending Screed |
| SB: |
Fixed-Width Screed |
Technical alterations reserved.
