POWER UNIT
| Engine: |
CUMMINS |
| Type: |
QSB 6.7 C170 |
| Kind: |
6-cylinder diesel engine, liquid-cooled |
| Output: |
|
| Nominal: |
127 kW / 2,000 rpm |
| ECO Mode: |
119 kW / 1,800 rpm |
| Fuel Tank: |
228 gal. (U.S.) |
| Electrical System: |
24 V |
UNDERCARRIAGE
| Front Wheels: |
4 solid tires mounted on pivoting bogies |
| Tyre Equipment: |
solid tyres |
| Tyre Size: |
540/300 – 390 |
| Rear Wheels: |
2 high-floatation tires |
| Tyre Size: |
16,00 in. x 24 in. |
| Traction Drive: |
separate hydraulic drive electronically controlled for each driven wheel |
| Standard: |
2 powered rear wheels |
| Option: |
2 powered rear wheels and 2 powered front wheels |
| Speeds: |
|
| Pave Speed: |
76 m/min. |
| Travel Speed: |
20 km/h |
| Turning Radius: |
7.25 m (outside) |
| Power Steering: |
hydraulic |
| Service Brake: |
amply-dimensioned multiple-disk brake operated by foot pedal |
| Parking Brake: |
spring-loaded multiple-disk brake, maintenance-free |
| Service Brake: |
hydrostatic |
MATERIAL HOPPER
| Hopper Capacity: |
10.9 tonnes |
| Width: |
3277mm |
| Feed Height: |
620mm (bottom of material hopper) |
| Push-Rollers: |
oscillating, displaceable forwards by 2 in. and 4 in. |
CONVEYORS AND AUGERS
| Conveyors: |
2, with replaceable feeder bars, conveyor movement reversible |
| Drive: |
separate hydraulic drive provided for each conveyor |
| Speed: |
31 m/min |
| Augers: |
2, with exchangeable auger flights, auger rotation reversible |
| Diameter: |
400mm |
| Drive: |
separate hydraulic drive provided for each auger |
| Speed: |
110 rev./min. |
| Auger Height: |
|
| Standard: |
infinitely variable by 150 mm, hydraulic |
| Lubrication: |
Centralized Lubrication System, electrically driven grease pump (optional) |
SCREED
| Carlson EZ III-08 (V): |
|
| Basic Width: |
2.6m, infinitely variable range 2.6m to 4m |
| Maximum Width V: |
5.8m |
| Carlson EZ IV-815 (V): |
|
| Basic Width: |
2.6m, infinitely variable range 2.6m to 4.6m |
| Maximum Width V: |
5.8m |
| Layer Thickness: |
30cm |
| Screed Heating: |
electric by heating rods |
| Power Supply: |
three-phase A.C. generator |
DIMENSIONS AND WEIGHTS
| Length: |
Tractor Unit and Screed in Transport Position |
| Carlson EZ III-08 V |
6m |
| Carlson EZ IV-815 V |
6m |
| Weights: |
Tractor Unit with Screed |
| Carlson EZ III-08 V |
14.5 tonnes |
| Carlson EZ IV-815 V |
14.9 tonnes |
| Key: |
|
| V: |
equipped with Vibrators |
Technical alterations reserved.
