VÖGELE Laser Receiver

The Non-Contacting VÖGELE NIVELTRONIC Grade and Slope Control System

A rotary laser is in permanent contact with the VÖGELE laser receiver. Any error in elevation is detected and signalled to VÖGELE NIVELTRONIC for correction. The Non-Contacting VÖGELE NIVELTRONIC Grade and Slope Control System stands out through easy handling.

418

The laser receiver, when connected to NIVELTRONIC, is recognized automatically as a grade sensor and immediately ready for operation. Thanks to the laser receiver’s large pick-up range, there is no need to adjust the mast, to which it is attached, while paving.

Vital features of the VÖGELE Laser Receiver are summarized below:

  • 1. The VÖGELE Laser Receiver is ideal, above all, when paving large areas
    (such as sports stadiums, car parks, storage areas etc.).
  • 2. The rotating beam emitted by the laser unit creates a laser plane
    picked by the laser receiver on the paver.
  • 3. Should the laser receiver on the paver move above or below the laser
    plane, signals for correction are emitted to the VÖGELE NIVELTRONIC®
    Grade and Slope Control System.
  • 4. The VÖGELE Laser Receiver can be used with standard-type rotary lasers
    featuring wavelengths between 670nm und 1000nm. Various makes are
    possible such as Eagle 310 AGL, Eagle 2 AGL, LP30 and RL-H2S.
  • 5. Fitting at a height of up to 4.5m guarantees uninterrupted operation
    even with job site vehicles passing.

VÖGELE Laser Receiver LS-250

174

  • Operating Voltage: 20VDC – 30VDC
  • Current Input: 200mA (approx.)
  • Pick-up Range: 22cm (± 11cm)
  • Output Signal: 0.1V/cm (4V Reference)
  • Internal Resolution: 0.1mm
  • Wavelength: >670nm – <1000nm
  • CAN Interface: ISO 11898 – 24V, 125 kBits/sec.
  • Ambient Temperature: -10 °C to +70 °C
  • Storage Temperature: -25 °C to +85 °C
  • Type of Enclosure: IP65

0

The rotating beam
emitted by the laser
unit creates a laser
plane picked up by
the laser receiver
on the paver.

QUICK FINDER